R Series Reduction Gearbox Cast Iron R Series Electric Motor Manual Transmission Helical Gearbox Reduction Gears
Description:
R Series Helical Gear Reducer for Hard Gear Surface Helical Gear Reducer, gear materials are all 20CrMnTi, after carburizing treatment, tooth surface hardness of 58-62HRC, grinding accuracy of up to 6 levels, to ensure the reliability of the reducer reducer and low noise. The speed ratio can be from (with 4-pole motor) 1.6-264, can be divided into one stage transmission (transmission efficiency can reach 98%). Two-stage transmission (transmission efficiency up to 96%), three-stage transmission (transmission efficiency up to 94%). If equipped with 6 or 8 pole motor can obtain lower output speed. If you need a lower output speed can be used in the form of two-stage reducer, can obtain a lower output speed (more than 10,000 speed ratio). If the input is equipped with a continuously variable speed machine, the requirements of variable speed can be realized. Output forms are vertical and horizontal two, the output shaft is divided into solid shaft, hollow shaft (or non-standard production), can be installed in different directions and angles, can be used positive and negative. The reducer can be equipped with different types of motors (ordinary motors, single-phase motors, explosion-proof motors, variable frequency motors, brake motors, etc.).
R series Rigid tooth flank helical gear box Features:
1, R series helical gear reducer, combined with the international technical requirements, has the very high technology content;
2, Save space, reliable and durable, bear high overload capability, power up to 132 kw;
3, Low energy consumption, superior performance, speed reducer efficiency is as high as 95% above;
4, Small vibration, low noise, high energy saving;
5, Choose high quality forged steel material, semi steel housing, gear surface after high-frequency heat treatment;
6, Small horizontal deviation of output shaft, compact structure, maximum utilization of housing space, accommodation of 2-stage and 3-stage gears in one case.
7, Unitary cast housing with high rigidity, enhanced shaft strength and extended bearing lifetime.
8, The special-purpose CRM Series for agitators can withstand larger axial and radial load
9, Mounting mode: Foot-mounted, flange-mounted.
10, Input mode: Coupled motor, belted motor, input shaft or connection flange.
Technical Parameters:
Output speed: 0.1 ~ 1000 / min
Output torque: Acuities were 18000 n. M
Motor power: 0.12 ~ 132 kw
Link code and form:
R - foot installation, shaft extension type connection
RF - flange, shaft extension type coupling installation
RX - foot installation, single-stage coupling shaft extension type
RXF - flange, shaft extension type single-stage coupling installation
R Series Rigid Tooth Flank Helical Gear Box Advantages:
1. Product advantages: High modular design, making all the series apply fewer components, it can conveniently equip electric motor or other driving forces of various types.
2. The cabinet applies integral and high-strength casting mode, which has high rigidity and vibration resistance performance.
3. Helical Gear box applies low-carbon alloy steel quenching gear grinding process and shape-correction technology, making the products have larger bearing capacity. The operation is reliable, which can decrease noise and improve efficiency. Transmission ratio is divided into details, the scope is wide. Combined type can obtain larger transmission ratio.
4. Gear unit is appropriate to be mounted at any space and any angle.
R Series Rigid Tooth Flank Helical Gear Box Application:
The products are widely applied in electricity, coal, cement, metallurgy, harbor, agriculture, shipping, lifting, environment protection, stage, logistic, weaving, paper making, light industry, plastics and Other regions.
Helical Gear box can modular compose with other reducers and variator, get a large reduce ratio drive and variation. Therefore it is applied to many industrial areas, such as Metallurgical mines, lifting transportation, petrochemical construction, textile, environmental, light electric, plastic machine, parking equipment and so on.
Packaging & Shipping:
1. Prevent from damage.
2. As customers' requirements, in perfect condition.
3. Delivery : As per contract delivery on time.
4. Shipping : As per client request. We can accept CIF, Door to Door etc. or client authorized agent we supply all the necessary assistant.
FAQ:
1, Q: What's your MOQ for each series gearbox?
A: 1 unit is ok for different types gearbox motor.
2, Q: What about your warranty for your gear reducer with motor ?
A: One year, but except man-made destroyed.
3, Q: Do you accept OEM with cusotmer-logo?
A: Yes, we have about 15 years OEM experience, now we focus on our own brand.
4, Q: How about your payment terms?
A: TT, western union, paypal. 100% payment in advanced less $5000, 30% as deposit, balance beofre delivery if order value over $5000.
5, Q: How about your packing?
A: Plywood case.
6, Q: What information should be given, if I buy gearbox from you?
A: Rated power, gearbox ratio, input speed, mounting position, more details, better!
Audited Supplier 
){kind=link}